*Not recommended for chrome or other metalized or textured films*
Specification:
*Light weight: 1.2 oz/unit
*Length: Tape 5M /16FT (Roll)
*Convenient & Effective.
*Cuts like a knife, Only better - Guaranteed.
*Finish vehicle graphic installations without a blade. Knife Tape turns easily in any direction to follow contours, curves and edges on vehicles.
There are 7 types of Knife tapes that can be used depending on your application.
Finishline – Edge trimming
Designline – Intricate designs
Triline – Pinstriping
Bridgeline – Wide Gap Trimiming
Perf Line – Perforated Window Film
PPF Line – Clear Protective Film
Precision Line – Edge Trimming Tough Films
How to use:
Step 1: Clean and dry the surface of articles to make the surface clean and bright.(Water and dust affect the adhesion of the knife tape)
Step 2: Use the knife tape on the surface of the image design.(Please reserve 2 inches of tape thread.Convenient for wire drawing during film cutting)
Step 3. Cover the vinyl film on the surface of the designed knife tape and make it stick to the film tightly.(Novice users can use scissors to cut vinyl film into a small opening at the starting point of the pull line.It can help the knife tape to cut the vinyl flim easier.Make the cut of the film neat and perfect,if you pull line faster)
Step 4: Removing the waste of the useless part and pulling out the residual adhesive tape.
Step 5:Use the squeegee to pull in the edges, so that you can better complete the car wrapping film work.
USA Store
