Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)

He instalado el Noctua NF-A4x10 FLX en mi impresora 3D para mejorar la refrigeración del hotend y reducir el ruido, y el cambio ha sido espectacular.🔹 Silencio absoluto: Noctua es conocido por sus ventiladores silenciosos, y este no es la excepción. Ahora mi impresora funciona con mucho menos ruido.🔹 Mejora la disipación de calor: Gracias a su diseño optimizado, el flujo de aire es suficiente para mantener estable la temperatura del hotend o de la electrónica.🔹 Materiales de alta calidad: Se nota la diferencia con los ventiladores genéricos, este Noctua no vibra ni se desgasta rápidamente.🔹 Compatible con múltiples aplicaciones: Perfecto para impresoras 3D, routers y otros dispositivos pequeños.⚠️ Cosas a tener en cuenta:Voltaje: Este modelo es de 12V, por lo que si tu impresora usa 24V necesitarás un convertidor o conectarlo a una fuente de 12V.Menos presión estática: Si lo usas para enfriar el hotend, verifica que tenga suficiente flujo de aire en tu configuración.Más caro que otros ventiladores, pero la calidad y durabilidad lo justifican.💡 Conclusión: Si quieres menos ruido, mejor disipación y un ventilador duradero, el Noctua NF-A4x10 FLX es una excelente elección para tu impresora 3D.

I got this for my Reolink NVR, which with the factory fan, is almost unbearable to have running near you due to the constant noise from the fan.Glad I found this fan because it absolutely makes it quieter without a doubt. If you want to make it even quieter, you can install the inline noise reducer (that is included in the box) which slows the fan speed down a bit, but at the cost of a little less air flow.Also, it comes with all the various adapters you need to make it a truly plug and play solution.Just as a reference, for my NVR, I needed to use the adapter that converts the Noctua fan's 3 pin connector to the corresponding 2 pin connector on the NVR board, which conveniently is included in the Noctua box.If you're tired of hearing the droning noise from your NVR, look no further!

These fans supply good air flow, with minimal wind noise. They came with standard mounting holes and lots of connector options.

Not sure if it was needed but I wanted to add an exhaust fan for my Reolink RLN36 NVR. The packaging on this fan is quite impressive and you can tell that it's a premium product. I've always heard about Noctua fans known for their ugly color but great performance with low noise. This is my first time buying one.Installation was very easy I had to use a bit of force on the 2 screws to get them into the Reolink chasis holes as they were a bit smaller than the screws. Fan was plug and play, I just had to use the pin adapter. I didn't use the low noise adapter because it's not needed. I can barely hear the fan at it's current speed.I'm happy with the purchase as it will keep my Skyhawk 16TB drive a little bit more comfy and cool inside the NVR.

Used this to replace the loud fan in my Silverstone FX500 Flex PSU and pushes enough air at 3,500 rpm to keep my PSU cool. At 4,500 RPM it’s noticeable but not horribly loud but helps push even more air when gaming. However I could not get the fan to work when I hooked it to the PSU and had to hook it to a fan header on my MOB but that’s not to big of a problem anyway. Some were saying this fan does not push enough air but seems fine to me.