26 Piece Chenille Letter Iron on Patches Sew On Chenille Varsity A-Z Patches Alphabet Patches Letter Patches for DIY Supplies (Cute Style,2.8 Inch)

Feature:

Ironing method:
1. First, put the cloth sticker in the position where you want to put it. The side with hot adhesive is attached to the clothes (the glue can't be torn off).
2. If you turn the clothes upside down (or put a thin layer of cloth on the cloth sticker and skew it from the front, you can use this method, but the cloth must not be too thick)
3. Adjust the temperature of the electric iron to 120-160 degrees, and heat it for 8-15 seconds, so that the cloth can be heated evenly.
4. The edge of the cloth should be ironed several times to prevent it from falling off.
5. After the hot paste with plastic paper on the surface is cooled down (except hot-torn), carefully tear off the thin plastic layer outside from one corner.

Warm tips:
1. Once the cloth is stuck, it is difficult to take it off, and it is difficult to wash it off with water, so be sure to set the position before sticking.
2. Cloth stickers with sequins, beads, rhinestones, silk flowers and fur balls, as well as cloth stickers embroidered with metal wires, should be ironed from the back first, and then trimmed from the front after the cloth stickers are firmly fixed, so as not to hurt the sequins or other ornaments on the front.
3. Clothes (or other textiles) should be kept dry, and no iron should be applied to spray water on cloth or clothes when ironing.
4. After the cloth is ironed, it can be closely combined with clothes (or other textiles) for a long time. If the cloth sticker falls off after a period of time, or after washing, it means that the iron temperature is too low during ironing, or the ironing time is too short, so you can repeat the original operation and iron the cloth sticker again.
5. If you must use it on rough fabrics, we recommend using hot tape, and b7000 glue or just hand sewing.

Specifications:
Quantity: 26 pieces

Package includes:
26 x Letter iron on patches